Differential Rebuild Kit Rear (final Gear) 43:10 Ratio for
Toyota Uk / Europe - Land Cruiser
KDJ90 - COLORADO/PRADO 3.0TD 8/2000-9/2002 SWB UK/IMPORT
DescriptionJanuary 2002 Onwards (With differential lock fitted)
A rear differential rebuild kit consisting of:
1 x Crown wheel and pinion (Italian)
1 x Pinion flange. (Japan)
2 x Carrier bearings. (KOYO Japan)
1 x Inner pinion bearing. (KOYO Japan)
1 x Outer pinion bearing. (KOYO Japan)
1 x Diff gasket.
1 x Pinion spacer. (Collapsible tube)
1 x Pinion seal. (Genuine)
1 x Pinion stake nut.
When replacing these parts you may also need:
2 X Axle tube O-rings.
2 X Drive shaft seals.
Helpful note: Excessive wheelspin or sudden snatching (especially with oversize tyres) can severely reduce the lifespan or even failure of the differential components. This type of use cannot be covered by warranty.